Pond Sealant

Soilfloc® Sealant is the best polymer based sealant available for your canal, irrigation ditch or watering hole. Specifically designed to find leaks, whether in the floor, the wall or through rock formations and seal them. Soilfloc® custom blends linear and cross-linked polymers to seal any type of soil, for any sized project.

Muck Remover
The biological removal of muck and sludge from ponds, lakes and canals is an ecological way to eliminate organic sediments from ruining shorelines and making swimming impossible. Safe muck eating bacteria are blended from anaerobic bacterial mixtures and enzymes that specifically target the thick, black, stinky muck that is common in ponds and lakes.

Dock Bubblers
Bubbler systems use perforated tubing placed at the bottom of the water around a boathouse, dock or wall. When using diffuser lines to protect your dock from ice damage there will be some fairly common installation procedures: place the air compressor in a ventilated cabinet or shed and run an airline to the structure where a weighted bubbler hose is placed at strategic points around the dock or against the wall.

Solar Aeration

Bacteria & Clarifiers

Large Ponds & Lakes

Pond Pumps

Information & Articles

How deep should an ice eater be in the water?

What is the best depth to have my ice eater? I have a large dock with two boat slips and want to use a 1/2 HP deicer and want to ensure I have it at the most effective depth.

 

Thanks!
asked by anonymous

Please log in or register to answer this question.

1 Answer

0 votes

You typically want to position the submersed unit as deep as possible around the structure you wish to protect; this allows the warmer waters to be pushed towards the surface and the thrust to keep ice from forming.

If the depth around your dock is very deep then you don't want to place your bubbler too deep. A maximum depth would probably be around 15 feet. Most of the dock mount kits allow for a 10 foot pole so if you can put the unit at a 10 foot depth you will be fine.

If you are in a shallow area then you should try and position the unit as deep as possible but allow 18 inches off the bottom.

As a rule of thumb, for every foot of submergence, a deicer will keep an area of around 7' - 9' in diameter. Windchill, air temperature and sunlight can significantly change this formula so use it as an estimator only. The angle which the deicer is suspended will also change the size and shape of the ice free zone.

There is more information here: http://www.thepondreport.com/dock-bubbler-deicer.shtml

answered by TPR

Pond Report Store

Algaecides & Bacteria | Deicers & Bubblers | Weed Removal | Liquid Bacteria | Pond Pumps & Fountains | Aeration | Winter Pond Care | Algae Control | Pond Liner | Muck Pellets | Build a Solar Aerator | Rotary Vane Compressors | Floating Fountains | Building a Pond | Linear Air Compressors & Pumps | Weighted Airline | Diffusers & Airstones | Solar Aeration Systems | DC & Battery Operated Pumps | Windmill Aeration | Dock Bubbler Packages | Building a Waterfall | Dyes & Colorants | Consultations | Questions & Answers | Links & Resources | Eurasian Milfoil | |
Mosquito Control | Pondkeeper Treatments | Aeration Systems | Septic Bacteria | Grease Trap Blocks | Dissolved Oxygen Meters | SOTR & Pumping Rates | Duckweed Control | Pond Plans & Pond Building Books & Guides

Contact Us

© 2007 - 2018 The Pond Report

...