25' Single Pole Windmill Aeration System - Free Shipping in the USA

Free Shipping USA

25' Tall to really catch the wind and provide big aeration! The Telescopic Windmill Aeration Systems includes a 25' pole assembly, air pump with high-output compressor, 100` of regular airline, 50` of Weighted Airline, Airstone diffuser, Foot Valve and Hose Connector Pack.

The telescopic pole windmill system is ideal for ¼ acre to 3 acre ponds that are in public domain - such as golf courses or municipal ponds. The tower is designed like a 25 Ft tall light post and its modern style has attracted many residential and rural pond owners as well.

The tower design hides all airline which goes down from the compressor through the tower and it prevents any one from climbing the tower as well. Each system comes in three segments with an hinge system at the base for ease of assembly and installation.

The blade diameter on all units is a full 73" in diameter which is the largest windmill head on the market for pond aeration. This allows our units to pump up to 4.5 CFM of air and still turn at low wind speeds due to our windmill heads higher torque. We can also produce up to 30 psi of air allowing these units to aerate ponds or lakes that are 10', 20' or even 30' deep.

This 25' Single Pole Wind Driven Aeration System offers:

• Bal Cam technology minimizes bearing fatigue with new Stainless Steel components
• Patent pending new design
• Fast & Easy Assembly
• Manufactured with high quality 18 gauge galvanized steel
• Newly redesigned blades and front dome assembly for better air flow
• Self-governing head to protect the unit in high winds
• New secure locking mechanism that attaches the windmill head to shaft
• Larger check valves and upgraded ½” airline to handle the increased air that is produced
• High Air Output - 3.0 - 4.5 CFM rating Rated at 30 psi
• Full 5 year warranty on bearing’s and cam’s!

NOTE: A CONCRETE PAD MUST BE POURED TO ENSURE PROPER ANCHORING OF THE TELESCOPIC POLE TOWER.

The base should be 10' wide by 10' long by 6" think. Type "25 MPA" concrete, reinforced with a row of 5/8" rebar off center in each direction. The anchor bolts should be connected to the rebar by either weld toe or tie wire for additional support.

This will provide a base weight of approximately 5000 lbs and will counter balance the windmill head assembly at the top of the 25' pole.

Due to the varied nature of anchoring systems no anchoring hardware (nuts, bolts or washers) are provided. The unit does come with a pre-cut hinged fotting to attach to the pole and to the cement base but you will need to use Grade 8, 1" diamter bolts, nuts and washers with a length that will depend on the the final thickness of your concrete pad.

Windmill Parts Included

Compressor Box
1pc - Free-Air Bal Cam single Diaphragm Compressor
1pc - Foot Valve
1pc - Pivot Tube Washer
1pc - Airstone

Blade and Tail Box
1pc - Dome
12pcs - Blades
12pcs - Blade Braces
1pcs - Wheel Hub
2pcs - Tail Fins
1pc - Pivot Tube
2pcs - OWS Decals
1pc Blade and Tail Bolt Package

Telescopic Tower
1pc - Telescopic Pole Hardware Package
1pc -  7" dia. x 10' long pole section
1pc -  4" dia. x 10' long pole section
1pc -  2" dia. x 5' long pole section


Tail Arm Box
2pc - Tail Arms

Accessory Box
100' Poly Tubing
Airstone with footvalve

Telescopic Pole Hardware Package

Write a review